Description
Return bridge excitation power and area density.
Bench measurements use supplied electrical/force references, contact geometry and calibration models. A bridge voltage, pressure or drift correction evaluates a local relationship while actual wiring, sensor response, safe excitation and biological contact conditions require independent verification.
Return bridge excitation power and area density.
When to use this tool
Use Bridge Excitation Power Density when checking the stated benign bench sensor, contact or calibration convention.
How to use the tool and how it works
- Enter excitationVoltage, bridgeResistance, area. Use the units and conventions below.
- Run the tool. Correct any format, range, or cross-field input error before interpreting the output.
- Read power, powerPerArea. Use the output convention below.
Return bridge excitation power and area density. Require bridgeResistance and area > 0; power = voltage²/resistance, powerPerArea = power/area.1
| Input field | Meaning and units | Accepted input |
|---|---|---|
| excitationVoltage | Excitation Voltage | Required. Finite number. |
| bridgeResistance | Positive equivalent input resistance of the bridge, not an individual arm unless appropriate. | Required. Finite number; strictly above 0. |
| area | Area | Required. Finite number; strictly above 0. |
| Output field | Interpretation | Returned shape |
|---|---|---|
| power | Power | Required. Finite number. |
| powerPerArea | Power Per Area | Required. Finite number. |
{
"input": {
"excitationVoltage": 5,
"bridgeResistance": 100,
"area": 2
},
"output": {
"power": 0.25,
"powerPerArea": 0.125
}
}Limitations and assumptions
- The resistance is the supplied equivalent load; heat transfer, electrical safety and permissible tissue or sensor heating are not established.
- Inputs must satisfy both the field types and the cross-field conditions above. Invalid input causes an error; a successful false flag or documented placeholder is a different result.
- Numeric calculations use binary floating point unless exact decimal-integer arithmetic is explicitly stated. No hidden measurement tolerance or decimal rounding is added; nonfinite or out-of-contract results are rejected. Numeric signed-zero results are exported as zero.
Alternative or Complementary methods
Use calibrated instruments, verified wiring/geometry and a complete engineering assessment; involve qualified professionals for device safety or clinical interpretation.
References
Similar or alternative tools
- Sensor Bridge Imbalance Voltage
Return an ideal bridge-divider imbalance voltage.
- Sensor Bridge Strain Gauge Factor
Return a supplied strain-gauge bridge approximation.