Grape Bin Fill Weight Capacity

Compare measured bin geometry/loose bulk density against caller already-established gross mass limit minus tare; no structure/forklift capacity approval and compressibility/dynamic loads excluded.

Description

Bin geometry and measured loose bulk density give a volume-based payload.

Bin geometry and measured loose bulk density give a volume-based payload. A declared gross mass limit also includes the empty bin tare.

Compare measured bin geometry/loose bulk density against caller already-established gross mass limit minus tare; no structure/forklift capacity approval and compressibility/dynamic loads excluded.

When to use Grape Bin Fill Weight Capacity

Use this tool to compare measured bin geometry/loose bulk density against caller already-established gross mass limit minus tare; no structure/forklift capacity approval and compressibility/dynamic loads excluded.

Prepare vineyard measurements, dates or block records for the intended growing period. Keep weights, counts and weather observations in the stated units.

How to use Grape Bin Fill Weight Capacity and understand its results

Prepare vineyard measurements, dates or block records for the intended growing period. Keep weights, counts and weather observations in the stated units.
Enter interiorBinDimensionsM, callerMaximumFillHeightM, measuredLooseGrapeBulkDensityKgPerM3, declaredGrossBinMassLimitKg, emptyBinTareKg using the field table and calculation rules, then run the tool.
Read geometricGrapeFillVolumeM3, densityModelPayloadKg, declaredMassLimitedPayloadKg, volumeRequiredAtDeclaredPayloadLimitM3. The explanation below defines the units, signs, ordering and any flags or placeholder values.
If the tool reports an input issue, correct the values and run it again. Apply the stated assumptions when interpreting a successfully returned result.

Input field	Meaning	Value type; see rules below	Requirement
interiorBinDimensionsM	Interior bin dimensions m	list of number	Required
callerMaximumFillHeightM	Caller maximum fill height m	number	Required
measuredLooseGrapeBulkDensityKgPerM3	Measured loose grape bulk density kg per m3	number	Required
declaredGrossBinMassLimitKg	Declared gross bin mass limit kg	number	Required
emptyBinTareKg	Empty bin tare kg	number	Required

Supply three positive interior dimensions, fill height within the bin, positive density and nonnegative gross limit and tare. Require gross limit at least tare; return geometric volume, modeled payload, limited payload and its required volume.^[1]

payload = min(fill volume × bulk density,gross limit − tare)

Units, indexing, boundary conditions and exceptional cases are defined in the calculation rules above.

Output field	Meaning	Value type
geometricGrapeFillVolumeM3	Geometric grape fill volume m3	number
densityModelPayloadKg	Density model payload kg	number
declaredMassLimitedPayloadKg	Declared mass limited payload kg	number
volumeRequiredAtDeclaredPayloadLimitM3	Volume required at declared payload limit m3	number

json

{
  "input": {
    "interiorBinDimensionsM": [
      1,
      2,
      0.5
    ],
    "callerMaximumFillHeightM": 0.4,
    "measuredLooseGrapeBulkDensityKgPerM3": 400,
    "declaredGrossBinMassLimitKg": 300,
    "emptyBinTareKg": 20
  },
  "output": {
    "geometricGrapeFillVolumeM3": 0.8,
    "densityModelPayloadKg": 320,
    "declaredMassLimitedPayloadKg": 280,
    "volumeRequiredAtDeclaredPayloadLimitM3": 0.7
  }
}

Limitations and assumptions

Compression and dynamic loads are excluded; supplied limits are not certified.

Numbers and computed results must be finite; overflow produces an error. Numeric lists are limited to 100,000 entries; the rules above may require smaller limits. Missing required fields, extra fields, wrong value types and violations of the calculation rules are input errors.

Alternative or Complementary methods

Use Picking Lugs Per Ton: Budget whole picking lugs from actual required mass and caller usable payload, retaining final capacity remainder; no bin-density estimate or load/handling safety certification. For a complementary task, use Machine Harvest Loss Percent: Audit independent preharvest/collected/ground/residual crop inventories, preserving signed unaccounted mismatch instead of forcing mass closure or calling every residual machine loss.

References

Grape Bin Fill Weight Capacity — tool.io

Similar or alternative tools

Picking Lugs Per Ton
Budget whole picking lugs from actual required mass and caller usable payload, retaining final capacity remainder; no bin-density estimate or load/handling safety certification.
Machine Harvest Loss Percent
Audit independent preharvest/collected/ground/residual crop inventories, preserving signed unaccounted mismatch instead of forcing mass closure or calling every residual machine loss.