Description
Label a recorded denture-base thickness and measurement site.
Prosthetic records use explicit material lots, shade systems, reference lengths, pressure and gap units. A dimensional scale change differs from acceptable fit, while a connection label differs from verified compatibility. Measurements and component assertions need the original device, material specification and qualified clinical interpretation.
Label a recorded denture-base thickness and measurement site.
When to use this tool
Use Denture Base Thickness Input when you already have prosthesisId, thicknessMillimeters, measurementSite and need to label a recorded denture-base thickness and measurement site.
How to use the tool and how it works
- Enter prosthesisId, thicknessMillimeters, measurementSite. Use the units and conventions below.
- Run the tool. Correct any format, range, or cross-field input error before interpreting the output.
- Read label. Use the output convention below.
Require nonempty prosthesisId/site and thicknessMillimeters>=0; format the supplied value in mm with its site.1
| Input field | Meaning and units | Accepted input |
|---|---|---|
| prosthesisId | Prosthesis Id | Required. Text; minimum UTF-16 length 1; maximum UTF-16 length 8192. |
| thicknessMillimeters | Thickness Millimeters | Required. Finite number; minimum 0. |
| measurementSite | Measurement Site | Required. Text; minimum UTF-16 length 1; maximum UTF-16 length 8192. |
| Output field | Interpretation | Returned shape |
|---|---|---|
| label | Label | Required. Text; maximum UTF-16 length 8192. |
{
"input": {
"prosthesisId": "P17",
"thicknessMillimeters": 2.5,
"measurementSite": "site A"
},
"output": {
"label": "P17; thickness=2.5 mm [site A]"
}
}Limitations and assumptions
- No device, site, thickness measurement, material strength or suitable design is evaluated.
- Inputs must satisfy both the field types and the cross-field conditions above. Invalid input causes an error; a successful false flag or documented placeholder is a different result.
- Numeric calculations use binary floating point unless exact decimal-integer arithmetic is explicitly stated. No hidden measurement tolerance or decimal rounding is added; nonfinite or out-of-contract results are rejected. Numeric signed-zero results are exported as zero.
Alternative or Complementary methods
Check actual component specifications, material lots, calibrated measurements and fit records. Use a full dimensional or mechanical assessment for a prosthesis; unit conversions, shade labels and one-point scale differences preserve narrower facts.
References
Similar or alternative tools
- Articulator Angle Reference Tag
Label an articulator angle with a supplied reference convention.
- Crown Margin Gap Unit
Convert a supplied crown-margin gap between micrometres and millimetres.