Description
Calculate emitter catch rate in mL/min and L/h.
Hydroponic records distinguish reservoir volumes, catch rates, media volume, nominal pump displacement and chemical reference labels. A top-up share can use final rather than initial volume, while a pH difference is not a chemical-dose calculation. Supplied parameters do not establish water quality, crop suitability or hydraulic performance.
Calculate emitter catch rate in mL/min and L/h.
When to use this tool
Use Hydroponic Emitter Catch Volume Rate when you already have caughtMilliliters, collectionMinutes and need to calculate emitter catch rate in mL/min and L/h.
How to use the tool and how it works
- Enter caughtMilliliters, collectionMinutes. Use the units and conventions below.
- Run the tool. Correct any format, range, or cross-field input error before interpreting the output.
- Read millilitersPerMinute, litersPerHour. Use the output convention below.
Require caughtMilliliters>=0 and collectionMinutes>0; rate=caught/minutes and L/h=rate*0.06.1
One litre is 1000 millilitres and one hour is 60 minutes. Consequently a rate in mL/min is multiplied by 0.06 to obtain L/h.2
| Input field | Meaning and units | Accepted input |
|---|---|---|
| caughtMilliliters | Caught Milliliters | Required. Finite number; minimum 0. |
| collectionMinutes | Collection Minutes | Required. Finite number; strictly above 0. |
| Output field | Interpretation | Returned shape |
|---|---|---|
| millilitersPerMinute | Milliliters Per Minute | Required. Finite number. |
| litersPerHour | millilitersPerMinute*0.06, using the same measured collection interval. | Required. Finite number. |
{
"input": {
"caughtMilliliters": 100,
"collectionMinutes": 2
},
"output": {
"millilitersPerMinute": 50,
"litersPerHour": 3
}
}Limitations and assumptions
- Assumes a representative constant collection interval; no emitter, pressure, uniformity or suitable irrigation schedule is assessed.
- Inputs must satisfy both the field types and the cross-field conditions above. Invalid input causes an error; a successful false flag or documented placeholder is a different result.
- Numeric calculations use binary floating point unless exact decimal-integer arithmetic is explicitly stated. No hidden measurement tolerance or decimal rounding is added; nonfinite or out-of-contract results are rejected. Numeric signed-zero results are exported as zero.
Alternative or Complementary methods
Use calibrated water and flow observations, actual reservoir geometry and the complete intended chemical or hydraulic model. Preserve concentration, temperature-reference and time bases; local offsets and volume shares do not choose nutrient, pH or irrigation adjustments.
References
Similar or alternative tools
- Hydroponic Grow Media Water Holding Fraction
Calculate retained water as a fraction of supplied media bulk volume.
- Hydroponic EC Temperature Reference
Preserve explicit conductivity unit and reference-temperature text.