Description
Calculate scaffold void volume and bulk-volume void fraction.
Bench measurements require explicit signal units, calibration signs, geometry and reference conditions. Engineering strain differs from final-length ratio, secant stiffness differs from a material modulus, and nominal contact area differs from actual conductive contact. A supplied coefficient or certificate reference does not establish device validity.
Calculate scaffold void volume and bulk-volume void fraction.
When to use this tool
Use Scaffold Void Volume Fraction when you already have bulkVolume, solidVolume and need to calculate scaffold void volume and bulk-volume void fraction.
How to use the tool and how it works
- Enter bulkVolume, solidVolume. Use the units and conventions below.
- Run the tool. Correct any format, range, or cross-field input error before interpreting the output.
- Read voidVolume, voidFraction. Use the output convention below.
Require bulkVolume>0 and solidVolume within [0,bulkVolume]; return bulk-solid and (bulk-solid)/bulk.1
| Input field | Meaning and units | Accepted input |
|---|---|---|
| bulkVolume | Bulk Volume | Required. Finite number; strictly above 0. |
| solidVolume | Solid Volume | Required. Finite number; minimum 0. |
| Output field | Interpretation | Returned shape |
|---|---|---|
| voidVolume | Void Volume | Required. Finite number. |
| voidFraction | Void Fraction | Required. Finite number. |
{
"input": {
"bulkVolume": 10,
"solidVolume": 3
},
"output": {
"voidVolume": 7,
"voidFraction": 0.7
}
}Limitations and assumptions
- Volume definitions must be comparable. No pore network, fluid accessibility, tissue response or physical scaffold is analyzed.
- Inputs must satisfy both the field types and the cross-field conditions above. Invalid input causes an error; a successful false flag or documented placeholder is a different result.
- Numeric calculations use binary floating point unless exact decimal-integer arithmetic is explicitly stated. No hidden measurement tolerance or decimal rounding is added; nonfinite or out-of-contract results are rejected. Numeric signed-zero results are exported as zero.
Alternative or Complementary methods
Use verified instrument records, calibration data and a complete device/material model. Evaluate uncertainty, operating conditions and appropriate professional requirements before interpreting local ratios or labels as performance, fitness or safety.
References
Similar or alternative tools
- Scaffold Geometric Porosity Input
Calculate supplied scaffold void volume and geometric porosity.
- Tissue Construct Hydration Mass Share
Calculate a supplied construct water mass and wet-basis water fraction.