Semiconductor Silicon Photonics Grating Coupler Efficiency Calculator
Audit actual grating-coupled power with independently established remaining path transmission; >1 correction signals mismatch not clipped, distinct from generic optical efficiency.
Description
Measured grating coupling includes the remaining optical path’s transmission.
Measured grating coupling includes the remaining optical path’s transmission.1
Reporting raw and path-corrected ratios makes that independent correction visible.
When to use Semiconductor Silicon Photonics Grating Coupler Efficiency Calculator
Use this tool when you need to reproduce the stated calculation from measured records or independently selected model inputs. Prepare measured device or specimen records under independently matched branch, temperature, frame, and unit conventions.
How to use Semiconductor Silicon Photonics Grating Coupler Efficiency Calculator and understand its results
- Prepare measured device or specimen records under independently matched branch, temperature, frame, and unit conventions.
- Enter observedCoupledOpticalWatts, observedIncidentOpticalWatts, callerMatchedPathTransmissionFractions, following the field table and rules below, then run the tool.
- Read pathCorrectedGratingCouplingFractions, rawObservedCouplingFractions. Use the output meanings below to interpret units, signs, flags, and any nested result fields.
- Correct reported input issues and run again. For a successful result, check the stated evidence coverage and assumptions before using it in your review.
| Input field | Meaning | Value type | Requirement |
|---|---|---|---|
| observedCoupledOpticalWatts | Observed coupled optical watts | list of number | Required |
| observedIncidentOpticalWatts | Observed incident optical watts | list of number | Required |
| callerMatchedPathTransmissionFractions | Caller matched path transmission fractions | list of number | Required |
Use aligned nonempty nonnegative coupled powers, positive incident powers, and path transmission fractions in (0,1]. Return coupled/incident and divide again by path transmission. Corrected values above one are retained for review rather than clipped or rejected.
raw_i=Pcoupled_i/Pincident_i; corrected_i=raw_i/pathTransmission_i Symbols follow the input and output meanings and the calculation rules above.
| Output field | Meaning | Value type |
|---|---|---|
| pathCorrectedGratingCouplingFractions | Path corrected grating coupling fractions | list of number |
| rawObservedCouplingFractions | Raw observed coupling fractions | list of number |
{
"input": {
"observedCoupledOpticalWatts": [
1,
2
],
"observedIncidentOpticalWatts": [
2,
4
],
"callerMatchedPathTransmissionFractions": [
0.5,
0.5
]
},
"output": {
"pathCorrectedGratingCouplingFractions": [
1,
1
],
"rawObservedCouplingFractions": [
0.5,
0.5
]
}
}Limitations and assumptions
Matched measurement branch, material state, calibration, and conventions must be independently established. Results do not certify device performance or operating conditions.
Missing required fields, unknown fields, wrong types, and violated calculation rules are input issues. Numeric values must be finite; nonfinite results are rejected. Evidence arrays must be dense, with no missing cells. Numeric observation lists allow at most 10,000 entries, subject to any smaller bounds stated above.
Alternative or Complementary methods
For a related review, use Semiconductor Silicon Photonics Grating Coupler Efficiency Vs Angle Calculator: Grating-coupler angle response belongs to matched wavelength and measurement conditions. This tool interpolates that observed response without choosing an optimum angle. For a complementary step, use Semiconductor Silicon Photonics Waveguide Bending Loss Calculator: Excess bend loss compares a bent guide with a matched straight reference. Dividing the logarithmic power difference by the observed bend count yields a per-bend observation.
References
Similar or alternative tools
- Semiconductor Silicon Photonics Grating Coupler Efficiency Vs Angle Calculator
Grating-coupler angle response belongs to matched wavelength and measurement conditions. This tool interpolates that observed response without choosing an optimum angle.
- Semiconductor Silicon Photonics Waveguide Bending Loss Calculator
Excess bend loss compares a bent guide with a matched straight reference. Dividing the logarithmic power difference by the observed bend count yields a per-bend observation.