Petroleum Cement Slurry Yield Calculator
Audit already mixed cement batch yield per weighed dry cement after independent gas-envelope correction, no mixture recipe, cement placement or seal integrity claim. Caller independently verifies units, applicability and matching conditions; no operational recipe, safety certification, causal efficacy or legal/resource classification is inferred.
Description
Slurry yield compares a mixed batch’s corrected volume with the dry cement mass used.
Slurry yield compares a mixed batch’s corrected volume with the dry cement mass used.1
This audit subtracts an independently measured entrained-gas envelope and pools the completed batches by total mass.
When to use Petroleum Cement Slurry Yield Calculator
Use this tool when you need to calculate the stated measurement summary or conditional model from matched observations. Prepare completed matched measurements, SI or explicitly stated oilfield units, and independent evidence for the selected branch or calibration.
How to use Petroleum Cement Slurry Yield Calculator and understand its results
- Prepare completed matched measurements, SI or explicitly stated oilfield units, and independent evidence for the selected branch or calibration.
- Enter observedAlreadyMixedCementBatchVolumesM3, observedCementDryMassKg, observedIndependentEntrainedGasVolumesM3, following the field table and calculation rules below, then run the tool.
- Read observedGasCorrectedSlurryYieldM3PerKg. For result objects, inspect the nested output fields below, including any missing evidence or selected indices.
- Correct any input issues and run again. Before using a successful result, review its units, signs, evidence coverage, and stated model or reference assumptions.
| Input field | Meaning | Value type | Requirement |
|---|---|---|---|
| observedAlreadyMixedCementBatchVolumesM3 | Observed already mixed cement batch volumes m3 | list of number | Required |
| observedCementDryMassKg | Observed cement dry mass kg | list of number | Required |
| observedIndependentEntrainedGasVolumesM3 | Observed independent entrained gas volumes m3 | list of number | Required |
Require nonempty aligned nonnegative mixed-batch and gas volumes and positive dry cement masses. Each batch volume minus gas must be nonnegative. Sum corrected volumes and divide by total dry kilograms for m³/kg; this is a pooled ratio rather than an unweighted average of batch yields.
yieldM3PerKg=Σ(batchVolume−entrainedGasVolume)/ΣdryCementMassKg Read these symbols with the field meanings and branch or reference rules above.
| Output field | Meaning | Value type |
|---|---|---|
| observedGasCorrectedSlurryYieldM3PerKg | Observed gas corrected slurry yield m3 per kg | number |
{
"input": {
"observedAlreadyMixedCementBatchVolumesM3": [
2,
3
],
"observedCementDryMassKg": [
100,
200
],
"observedIndependentEntrainedGasVolumesM3": [
0.1,
0.2
]
},
"output": {
"observedGasCorrectedSlurryYieldM3PerKg": 0.015666666666666666
}
}Limitations and assumptions
Measurements, unit conventions, branch identity, and model applicability must be independently established. The result does not infer a complete reservoir or flow model, operational settings, or a reserve classification.
Missing required fields, unknown fields, wrong types, and violated calculation rules return input issues. Numeric values must be finite; nonfinite numeric outputs are rejected. Arrays must be dense, with no missing cells. Numeric lists allow at most 10000 entries, subject to smaller tool-specific bounds above.
Alternative or Complementary methods
For a related task, use Petroleum Formation Volume Factor Water Calculator: Water formation-volume factor compares a parcel’s reservoir volume with its volume at stated stock conditions. This audit subtracts a separately measured gas-envelope correction before dividing matched same-parcel volumes. For a complementary step, use Petroleum Displacement Efficiency Calculator: Displacement efficiency compares removed oil with the oil initially present in assessed core pore volume. This calculator weights measured initial and residual saturations by pore volume and retains negative apparent displacement when residual exceeds initial.
References
-
Petroleum Cement Slurry Yield Calculator — tool.io
Similar or alternative tools
- Petroleum Formation Volume Factor Water Calculator
Water formation-volume factor compares a parcel’s reservoir volume with its volume at stated stock conditions. This audit subtracts a separately measured gas-envelope correction before dividing matched same-parcel volumes.
- Petroleum Displacement Efficiency Calculator
Displacement efficiency compares removed oil with the oil initially present in assessed core pore volume. This calculator weights measured initial and residual saturations by pore volume and retains negative apparent displacement when residual exceeds initial.