Geology Hydraulic Conductivity Hazen Calculator
Explicit hydraulic conductivity KH=C*d10²with diameter meters and independently calibrated Cunits1/(m·s). Applicable granular-soil domain externally verified; not intrinsic permeability, mixed cm/mmformula or universally fitted Hazenconstant.
Description
Hazen hydraulic conductivity scales with squared effective grain diameter under an applicable calibration.
Hazen hydraulic conductivity scales with squared effective grain diameter under an applicable calibration.1
The coefficient must match the chosen diameter unit and fluid context. Use this tool to calculate the stated observation or conditional model from supplied measurements.
When to use Geology Hydraulic Conductivity Hazen Calculator
Use this tool to calculate the stated observation or conditional model from supplied measurements. Establish the sample and coordinate basis, matching units, calibration source and applicable model assumptions.
How to use Geology Hydraulic Conductivity Hazen Calculator and understand its results
- Establish the sample and coordinate basis, matching units, calibration source and applicable model assumptions.
- Enter callerIndependentlyCalibratedHazenCoefficientPerMeterSecond, actualEffectiveGrainDiameterMeters, using the field meanings and rules below, then run the tool.
- Read result.conditionalHazenHydraulicConductivityMetersPerSecond. Interpret each field using the units, signs and evidence rules below.
- If input validation fails, correct the reported field and run again. Before applying a successful result, check the stated reference scope, units, assumptions and any retained unknown evidence.
| Input field | Meaning | Value type | Requirement |
|---|---|---|---|
| callerIndependentlyCalibratedHazenCoefficientPerMeterSecond | Caller independently calibrated hazen coefficient per meter second | number | Required |
| actualEffectiveGrainDiameterMeters | Actual effective grain diameter meters | number | Required |
Require positive effective diameter in meters and positive calibrated Hazen coefficient on a 1/(meter×second) basis. Multiply coefficient by squared diameter for m/s conductivity. No conversion from a centimeter-based empirical coefficient or intrinsic permeability is applied.
conductivityMPerS=coefficientPerMeterSecond×effectiveDiameterMeters² Apply the field units and exact ordering, boundary and evidence rules above.
| Output field | Meaning | Value type |
|---|---|---|
| result | Structured result containing the calculation or selected reference fields below | object |
| result.conditionalHazenHydraulicConductivityMetersPerSecond | Conditional Hazen Hydraulic Conductivity Meters Per Second; use the units, sign convention and calculation stated above | number |
{
"input": {
"callerIndependentlyCalibratedHazenCoefficientPerMeterSecond": 2,
"actualEffectiveGrainDiameterMeters": 3
},
"output": {
"result": {
"conditionalHazenHydraulicConductivityMetersPerSecond": 18
}
}
}Limitations and assumptions
The coefficient must match the chosen diameter unit and fluid context. Results depend on the independently established measurement basis and the exact model assumptions above.
Every listed input requires an explicit value. Unexpected fields, incorrect value types, nonfinite numbers and sparse numeric arrays fail validation; tool-specific bounds and alignment rules apply as described above. Extremely large inputs or outputs can also be rejected. An input error is distinct from a successful calculation that reports a false comparison or retains unknown evidence.
Alternative or Complementary methods
Use Geology Permeability Hazen Calculator to examine a related aspect: Hydraulic conductivity and intrinsic permeability have different dimensions.
Use Geology Sand Control Gravel Pack Permeability Calculator where its separate inputs and scope apply: Gravel-pack permeability depends on grain distribution, porosity, fines and compaction.
References
Similar or alternative tools
- Geology Permeability Hazen Calculator
Hydraulic conductivity and intrinsic permeability have different dimensions.
- Geology Sand Control Gravel Pack Permeability Calculator
Gravel-pack permeability depends on grain distribution, porosity, fines and compaction.