Dewatering Well Flow
Steady radial flow to a well in a confined aquifer by the Thiem equation; uses hydraulic conductivity, saturated thickness and two observation radii.
Description
Steady radial flow to a well in a confined aquifer by the Thiem equation; uses hydraulic conductivity, saturated thickness and two observation radii.
Dewatering Well Flow: Steady radial flow to a well in a confined aquifer by the Thiem equation; uses hydraulic conductivity, saturated thickness and two observation radii.
When to use Dewatering Well Flow
Use this engineering calculation for a transparent preliminary estimate or independent arithmetic check when geometry, materials, loads, operating conditions, and units are defined consistently.
- Conductivity Meters Per Second (m/s)
- Required number input.
- Aquifer Thickness Meters (m)
- Required number input.
- Inner Head Meters (m)
- Required number input.
- Outer Head Meters (m)
- Required number input.
- Inner Radius Meters (m)
- Required number input.
- Outer Radius Meters (m)
- Required number input.
How Dewatering Well Flow works
Steady radial flow to a well in a confined aquifer by the Thiem equation; uses hydraulic conductivity, saturated thickness and two observation radii. The tool evaluates the supplied inputs together and returns the named outputs below; it does not infer omitted operating conditions or change the units shown.1
- Flow Cubic Meters Per Second (m³/s)
- The resulting flow cubic meters per second returned as a number.
Limitations and assumptions
- Hydraulic equations require consistent datum, fluid properties, geometry, roughness, flow regime, and loss coefficients. Cavitation, air entrainment, unsteady flow, fittings, sediment, free-surface effects, and pump behavior may require a network or numerical model.
- Use finite inputs in the displayed units and preserve more precision than the final presentation requires. Independently verify safety-critical, financial, compliance, or production decisions.
Alternative or Complementary approaches
Check assumptions against drawings, measurements, current material data, and the applicable design code. Apply required load combinations and safety factors, then obtain qualified review and testing for consequential designs.
References
-
Fluid mechanics — Wikipedia contributors
Similar or alternative tools
- Heat Conduction Fourier
Steady one-dimensional conductive heat-transfer rate through a plane layer from conductivity, area, thickness and temperature difference.
- Soil Permeability Constant Head
Saturated hydraulic conductivity from a constant-head permeameter: k=QL/(Aht), where Q is collected volume.
- Soil Permeability Falling Head
Saturated hydraulic conductivity from a falling-head permeameter: k=(aL/At)ln(h1/h2).