Description
leakagePower = voltage²/leakageResistance; fraction = leakagePower/totalPower.
Electrical dissipation and temperature coefficients depend on operating conditions and component reference values. A calculated loss, local temperature factor or supplied-rating margin is only part of a thermal and reliability assessment.
leakagePower = voltage²/leakageResistance; fraction = leakagePower/totalPower.
When to use this tool
Use Capacitor Leakage Power Fraction when checking one supplied loss, temperature or power-margin term.
How to use the tool and how it works
- Enter voltage, leakageResistance, totalPower. Use the units and conventions below.
- Run the tool. Correct any format, range, or cross-field input error before interpreting the output.
- Read leakagePower, fraction. Use the output convention below.
Require positive leakageResistance and totalPower. leakagePower = voltage²/leakageResistance; fraction = leakagePower/totalPower.1
| Input field | Meaning and units | Accepted input |
|---|---|---|
| voltage | Voltage | Required. Finite number. |
| leakageResistance | Leakage Resistance | Required. Finite number; strictly above 0. |
| totalPower | Total Power | Required. Finite number; strictly above 0. |
| Output field | Interpretation | Returned shape |
|---|---|---|
| leakagePower | Leakage Power | Required. Finite number. |
| fraction | Dimensionless fraction on the stated denominator basis, not multiplied by 100. | Required. Finite number. |
{
"input": {
"voltage": 10,
"leakageResistance": 100,
"totalPower": 2
},
"output": {
"leakagePower": 1,
"fraction": 0.5
}
}Limitations and assumptions
- Use volts, ohms and watts. The fraction may exceed one because the supplied total is not reconciled; actual leakage, insulation integrity and component rating are not verified.
- Inputs must satisfy both the field types and the cross-field conditions above. Invalid input causes an error; a successful false flag or documented placeholder is a different result.
- Numeric calculations use binary floating point unless exact decimal-integer arithmetic is explicitly stated. No hidden measurement tolerance or decimal rounding is added; nonfinite or out-of-contract results are rejected. Numeric signed-zero results are exported as zero.
Alternative or Complementary methods
Use manufacturer ratings, thermal paths, derating and transient conditions for a complete practical design.
References
Similar or alternative tools
- Resistor Power Rating Explicit Margin
margin = rating-measured; fraction = measured/rating; exceeded uses measured > rating.
- Capacitor Charge Sign Reference
Calculate ideal capacitor terminal charge from explicit capacitance and terminal potentials under a supplied terminal sign reference.