Use this construction calculation for preliminary quantity, geometry, material, load, or coverage planning when dimensions and units have been measured consistently.

Prepared joint length (m)

Required number input.

Joint width (mm)

Required number input.

Raked depth (mm)

Required number input.

Estimate fresh mortar for repointing from total prepared joint length, average width, and raked depth. The tool evaluates the supplied inputs together and returns the named outputs below; it does not infer omitted operating conditions or change the units shown.^[1]

Fresh mortar volume (L)

The resulting fresh mortar volume returned as a number.

• A quantity estimate or simplified engineering formula is not a building-code check, stamped design, manufacturer approval, or site inspection. Material properties, tolerances, waste, moisture, workmanship, loads, local conditions, and code requirements can change the result.
• Use finite inputs in the displayed units and preserve more precision than the final presentation requires. Independently verify safety-critical, financial, compliance, or production decisions.

Verify dimensions on site, use current product data and local code requirements, include an explicit waste or safety allowance where appropriate, and obtain qualified structural, electrical, plumbing, or geotechnical review when required.

• Rectangular Excavation Volume

  Calculate in-place volume of a rectangular excavation from measured length, width, and depth.

• Tile Grout Volume

  Approximate grout volume for a rectangular tile grid from its surface area, tile dimensions, joint width, and joint depth.

• Trapezoidal Trench Volume

  Calculate straight trench volume with a constant trapezoidal cross-section from top width, bottom width, depth, and length.