Use this workshop calculation to turn measured dimensions and the selected construction convention into a cut, spacing, fit, or material-planning value.

Riser Millimeters (mm)

Required number input.

Going Millimeters (mm)

Required number input.

Blondel stair stride dimension 2×riser plus tread going, a planning check rather than a code-compliance determination. The tool evaluates the supplied inputs together and returns the named outputs below; it does not infer omitted operating conditions or change the units shown.^[1]

Stride Millimeters (mm)

The resulting stride millimeters returned as a number.

• Nominal dimensions, kerf, moisture movement, hardware clearances, wall squareness, and manufacturer instructions can change the required shop dimension. Measure the actual assembly and test critical joints on scrap before cutting finished material.
• Use finite inputs in the displayed units and preserve more precision than the final presentation requires. Independently verify safety-critical, financial, compliance, or production decisions.

Complement the calculated dimension with a physical story stick, dry fit, or full-size layout. Follow the hardware, coating, adhesive, or machine manufacturer's limits where they differ from a rule of thumb.

• Treppen Sicherheitsregel

  Compute the German stair safety-rule dimension as tread going plus riser height; this is a planning metric, not a structural or code check.

• Treppen Bequemlichkeitsregel

  Compute the German stair comfort-rule dimension as tread going minus riser height; interpret it as a planning metric, not proof of code compliance.

• Tread Depth Check

  Check whether a stair tread depth falls in the ideal 28 to 29 cm range and report its deviation in centimeters.