Schubkasten Boden Einnut Abstand 10mm Calculator
TITLE named10mm inset from actual drawer bottom datum, one explicit coordinate orientation; not groove-depth recommendation or universal manufacturer requirement. Actual independently verified stock/tool/hardware, matching units and applicability; not safe machine setting, capacity certification, code compliance or automatically approved fabrication.
Description
A drawer-bottom groove position is defined relative to a chosen reference coordinate.
A drawer-bottom groove position is defined relative to a chosen reference coordinate.1
This tool adds a fixed 10-millimeter offset without establishing whether that groove suits the drawer construction.
When to use Schubkasten Boden Einnut Abstand 10mm Calculator
Use this tool to add a fixed 10-millimeter offset without establishing whether that groove suits the drawer construction.
How to use Schubkasten Boden Einnut Abstand 10mm Calculator and how it works
- Prepare actualBottomPanelDatumMm, with the units, conventions and assumptions below.
- Enter the required fields and run Schubkasten Boden Einnut Abstand 10mm Calculator.
- Read result.value using the output definitions below.
- Correct any rejected inputs and rerun; interpret the result within the stated model and its assumptions.
| Input field | Meaning | Value type | Requirement |
|---|---|---|---|
| actualBottomPanelDatumMm | Actual Bottom Panel Datum Mm. Use the units and matching context stated in the calculation below. | number | Required; finite; other constraints below |
Supply a finite bottom reference coordinate in millimeters. Add exactly 10 millimeters and return the groove coordinate under that convention. No groove depth, panel fit or drawer-bottom load check is performed.
grooveCoordinateMm=bottomReferenceCoordinateMm+10 Apply the input ordering, units and branch conditions stated above.
| Output field | Meaning | Value type |
|---|---|---|
| result | Object containing the calculated or selected fields below. | object |
| result.value | Conditional dimension or offset coordinate in millimeters under the stated reference convention. | number |
{
"input": {
"actualBottomPanelDatumMm": 5
},
"output": {
"result": {
"value": 15
}
}
}Limitations and assumptions
The calculation uses the supplied observations and model inputs. It does not collect measurements, select a reference population or coefficient, or establish that the model applies to the actual case. The stated branch conditions and output units remain part of the result.
All fields require explicit values. Unexpected fields, wrong types, nonfinite numbers and sparse arrays are rejected. Alignment, bounds and supported-token rules are explained above; extremely large inputs or nonfinite results can also fail. Input errors differ from successful false comparisons, unavailable-domain flags and empty match lists.
Alternative or Complementary methods
Use Schubladen Auszug Überstand 25mm Calculator for a complementary operation: Drawer-slide overhang is measured relative to an established front reference position.
Use Schubkasten Boden Dicke nach Breite Calculator for a complementary operation: Drawer-bottom thickness depends on panel material, support, width and intended loading.
References
Similar or alternative tools
- Schubladen Auszug Überstand 25mm Calculator
Drawer-slide overhang is measured relative to an established front reference position.
- Schubkasten Boden Dicke nach Breite Calculator
Drawer-bottom thickness depends on panel material, support, width and intended loading.