Use this workshop calculation to turn measured dimensions and the selected construction convention into a cut, spacing, fit, or material-planning value.

Stock thickness (mm)

Required number input.

Remaining web thickness (mm)

Required number input.

Find rabbet cut depth from stock thickness and the remaining material web specified by the maker. The tool evaluates the supplied inputs together and returns the named outputs below; it does not infer omitted operating conditions or change the units shown.^[1]

Rabbet depth (mm)

The resulting rabbet depth returned as a number.

• Nominal dimensions, kerf, moisture movement, hardware clearances, wall squareness, and manufacturer instructions can change the required shop dimension. Measure the actual assembly and test critical joints on scrap before cutting finished material.
• Use finite inputs in the displayed units and preserve more precision than the final presentation requires. Independently verify safety-critical, financial, compliance, or production decisions.

Complement the calculated dimension with a physical story stick, dry fit, or full-size layout. Follow the hardware, coating, adhesive, or machine manufacturer's limits where they differ from a rule of thumb.

• Frame Rabbet Depth

  Size a glazing-frame rabbet from measured glass-and-backing stack thickness plus bedding clearance.

• Turning Blank Diameter

  Find the largest full-length round diameter that can be turned from rectangular stock without adding material.

• Half-Lap Cross Joint Calculator

  Compute the lap thickness and cut depth that halve a cross-lapped board.