Use this workshop calculation to turn measured dimensions and the selected construction convention into a cut, spacing, fit, or material-planning value.

Cabinet interior depth (mm)

Required number input.

Required rear clearance (mm)

Required number input.

Available slide lengths (mm)

Required list input.

Choose the longest supplied drawer-slide size that fits usable cabinet depth after rear clearance; no manufacturer sizes are assumed. The tool evaluates the supplied inputs together and returns the named outputs below; it does not infer omitted operating conditions or change the units shown.^[1]

Longest fitting slide (mm)

The resulting longest fitting slide returned as a number.

• Nominal dimensions, kerf, moisture movement, hardware clearances, wall squareness, and manufacturer instructions can change the required shop dimension. Measure the actual assembly and test critical joints on scrap before cutting finished material.
• Use finite inputs in the displayed units and preserve more precision than the final presentation requires. Independently verify safety-critical, financial, compliance, or production decisions.

Complement the calculated dimension with a physical story stick, dry fit, or full-size layout. Follow the hardware, coating, adhesive, or machine manufacturer's limits where they differ from a rule of thumb.

• Auszugsschienen Laenge

  Longest drawer-slide length that fits a measured cabinet interior depth after reserving a specified rear clearance; choose an available product size no longer than this result.

• Arbeitsplatten Ueberstand

  Countertop front overhang beyond cabinet depth after subtracting an optional rear backsplash or wall allowance.

• Dowel Hole Depth

  Size each equal dowel hole for a centered dowel plus end clearance on that side.