Use this workshop calculation to turn measured dimensions and the selected construction convention into a cut, spacing, fit, or material-planning value.

Clamex model

Clamex P model: p-10 or p-14.

Look up the P-System groove depth, 6 mm lever-access hole, and minimum butt-joint and miter material thicknesses for Clamex P-10 and P-14 connectors. The tool evaluates the supplied inputs together and returns the named outputs below; it does not infer omitted operating conditions or change the units shown.^[1]

Access hole diameter (mm)

Diameter of the lever access hole in millimeters.

Groove depth (mm)

P-System profile-groove depth in millimeters.

Minimum butt-joint thickness (mm)

Minimum material thickness for a butt joint.

Minimum miter thickness (mm)

Minimum material thickness for a miter joint.

• Nominal dimensions, kerf, moisture movement, hardware clearances, wall squareness, and manufacturer instructions can change the required shop dimension. Measure the actual assembly and test critical joints on scrap before cutting finished material.
• Use finite inputs in the displayed units and preserve more precision than the final presentation requires. Independently verify safety-critical, financial, compliance, or production decisions.

Complement the calculated dimension with a physical story stick, dry fit, or full-size layout. Follow the hardware, coating, adhesive, or machine manufacturer's limits where they differ from a rule of thumb.

• Rafix Drilling Pattern

  Look up the Rafix cam diameter, drilling depth, and edge distance for a given connector system.

• Minifix 34mm Drilling Pattern

  Look up the fixed Minifix 34 mm drilling pattern for 16, 18, and 19 millimeter panels.

• DIN 68901 Carcase Depth Lookup

  Look up the nominal DIN 68901 kitchen carcase depth for slim, standard, and deep classes; fronts are typically 50 mm deeper than the carcase.