Topfband Bohrbild Calculator
Translate independently verified hinge bore pattern about actual installation origin/rotation, signed edge crossing retained; center clearance is not bore-radius clearance, CNC instruction or fit/strength approval. Caller independently verifies units, applicability and matching conditions; no operational recipe, safety certification, causal efficacy or legal/resource classification is inferred.
Description
A hinge-bore template is transformed from local coordinates into the door-panel frame.
A hinge-bore template is transformed from local coordinates into the door-panel frame.1
Center-to-edge distance does not account for bore radius or establish adequate remaining material. Use Topfband Bohrbild Calculator to evaluate the supplied inputs under the model explained below.
When to use Topfband Bohrbild Calculator
Use Topfband Bohrbild Calculator to evaluate the supplied inputs under the model explained below. Establish the units, measurement scope and model assumptions before entering values.
How to use Topfband Bohrbild Calculator and understand its results
- Establish the units, measurement scope and model assumptions before entering values.
- Enter Caller verified hinge pattern local xy mm, Observed hinge pattern origin mm, Caller pattern rotation degrees, Observed door panel width mm, Observed door panel height mm using the field table and validation rules below, then run the tool.
- Read Translated hinge bore centers mm, Minimum center to panel edge mm; interpret the units, signs, ordering and unknown-value placeholders described below.
- Correct reported input errors and rerun. Apply successful results according to their specific meanings and check the assumptions before using them in a decision.
| Input field | Meaning | Value type | Requirement |
|---|---|---|---|
| callerVerifiedHingePatternLocalXyMm | Caller verified hinge pattern local xy mm | array of array | Required; constraints below |
| observedHingePatternOriginMm | Observed hinge pattern origin mm | array of number | Required; constraints below |
| callerPatternRotationDegrees | Caller pattern rotation degrees | number | Required; constraints below |
| observedDoorPanelWidthMm | Observed door panel width mm | number | Required; constraints below |
| observedDoorPanelHeightMm | Observed door panel height mm | number | Required; constraints below |
Enter a nonempty matrix of local manufacturer-template [x,y] points in mm, a two-component origin in mm, finite rotation in degrees and positive panel width and height in mm. Rotate each point with the standard 2D matrix and translate by the origin. Return points in template order and the minimum of x,y,width−x,height−y across all centers. Negative minimum flags a center beyond the rectangular panel. Bore radius, pattern calibration and material edge allowance are not included.
point=origin+R(rotationDegrees)×localPoint; minimumCenterEdgeMm=min(x,y,width−x,height−y) over centers Use the field order, units and branch conditions described above.
| Output field | Meaning | Value type |
|---|---|---|
| translatedHingeBoreCentersMm | Translated hinge bore centers mm | array of arrays |
| minimumCenterToPanelEdgeMm | Minimum center to panel edge mm | number |
{
"input": {
"callerVerifiedHingePatternLocalXyMm": [
[
0,
0
],
[
10,
0
]
],
"observedHingePatternOriginMm": [
20,
30
],
"callerPatternRotationDegrees": 90,
"observedDoorPanelWidthMm": 100,
"observedDoorPanelHeightMm": 100
},
"output": {
"translatedHingeBoreCentersMm": [
[
20,
30
],
[
20,
40
]
],
"minimumCenterToPanelEdgeMm": 20
}
}Limitations and assumptions
Center-to-edge distance does not account for bore radius or establish adequate remaining material. Apply the exact scope and assumptions explained above.
All listed fields require explicit values. Unexpected fields, incorrect types, nonfinite numbers and sparse arrays fail validation. Domain-specific bounds, alignments and supported tokens are explained above; extremely large inputs or outputs can also be rejected. Input errors differ from successful false results, empty match lists and unknown-evidence placeholders.
Alternative or Complementary methods
Use Griff Position Mitte 1/3 Regel Calculator for a related task: Handle-placement ratios locate a target within an adopted door-panel coordinate frame.
Use Exzenter Beschlag Bohrbild Calculator for a related task: A cam-fitting depth check compares a measured bore with a manufacturer's specified depth.
References
-
Topfband Bohrbild Calculator — tool.io
Similar or alternative tools
- Griff Position Mitte 1/3 Regel Calculator
Handle-placement ratios locate a target within an adopted door-panel coordinate frame.
- Exzenter Beschlag Bohrbild Calculator
A cam-fitting depth check compares a measured bore with a manufacturer's specified depth.