Description
Apply supplied affine sensor calibration coefficients.
Bench measurements require explicit signal units, calibration signs, geometry and reference conditions. Engineering strain differs from final-length ratio, secant stiffness differs from a material modulus, and nominal contact area differs from actual conductive contact. A supplied coefficient or certificate reference does not establish device validity.
Apply supplied affine sensor calibration coefficients.
When to use this tool
Use Device Calibration Factor Apply when you already have rawReading, gain, offset and need to apply supplied affine sensor calibration coefficients.
How to use the tool and how it works
- Enter rawReading, gain, offset. Use the units and conventions below.
- Run the tool. Correct any format, range, or cross-field input error before interpreting the output.
- Read calibratedReading. Use the output convention below.
Require gain!=0; return rawReading*gain+offset.1
| Input field | Meaning and units | Accepted input |
|---|---|---|
| rawReading | Raw Reading | Required. Finite number. |
| gain | Gain | Required. Finite number. |
| offset | Offset | Required. Finite number. |
| Output field | Interpretation | Returned shape |
|---|---|---|
| calibratedReading | Calibrated Reading | Required. Finite number. |
{
"input": {
"rawReading": 12,
"gain": 2,
"offset": -1
},
"output": {
"calibratedReading": 23
}
}Limitations and assumptions
- Negative gains are allowed. Coefficients and units must already be appropriate; the tool does not fit calibration, assess uncertainty or establish device validity.
- Inputs must satisfy both the field types and the cross-field conditions above. Invalid input causes an error; a successful false flag or documented placeholder is a different result.
- Numeric calculations use binary floating point unless exact decimal-integer arithmetic is explicitly stated. No hidden measurement tolerance or decimal rounding is added; nonfinite or out-of-contract results are rejected. Numeric signed-zero results are exported as zero.
Alternative or Complementary methods
Use verified instrument records, calibration data and a complete device/material model. Evaluate uncertainty, operating conditions and appropriate professional requirements before interpreting local ratios or labels as performance, fitness or safety.
References
Similar or alternative tools
- Sensor Zero Offset Correction
Subtract a measured zero offset from a supplied sensor reading.
- Phantom Reference Signal Ratio
Calculate a supplied phantom measurement/reference signal ratio.