MOSFET Channel-Length Modulation Calculator
Compute the channel-length modulation parameter from the Early voltage.
Description
Compute the channel-length modulation parameter from the Early voltage.
MOSFET Channel-Length Modulation Calculator is a focused tool for the following task. Compute the channel-length modulation parameter from the Early voltage. It reports Lambda from the values you provide rather than inventing measurements, coefficients, or professional judgment that are not part of the input.
When to use MOSFET Channel-Length Modulation
Use this semiconductor calculation for first-order device, material, fabrication, interconnect, packaging, or reliability estimates when every coefficient and unit convention is known.
- Early voltage (V)
- Required number in V. Early voltage of the device.
The cited overview of MOSFET supplies background for the terminology and domain context used by this tool.1
How MOSFET Channel-Length Modulation works
Compute the channel-length modulation parameter from the Early voltage. Inputs are interpreted exactly in the displayed units and the calculation returns the following fields without presentation rounding.
- Lambda (V^-1)
- Returned number in V^-1. Channel-length modulation parameter lambda in inverse volts.
Limitations and assumptions
- Material composition, geometry, process history, temperature, electric field, bias, interfaces, parasitics, and fitted parameter ranges can invalidate a compact semiconductor model.
- Early voltage must be at least 5e-324.
- Use finite inputs in the displayed units, preserve source measurements and assumptions, and independently verify consequential decisions.
Alternative or Complementary approaches
Compare the estimate with measured process data, current device documentation, and a higher-fidelity circuit, field, thermal, quantum, or TCAD model when the decision requires it.
References
-
MOSFET — Wikipedia contributors
Similar or alternative tools
- MOSFET Output Resistance Calculator
Compute the MOSFET small-signal output resistance from channel-length modulation.
- BJT Base Width Modulation Calculator
Quantify BJT base-width modulation (Early effect) from the reverse-biased collector-base junction: fractionalChange = (sqrt(Vbi+VCB)-sqrt(Vbi))·sqrt(2·εSi/(q·NA)) / Wb, with Vbi=builtInVoltageV>0 V, VCB=collectorBaseVoltageV>=0 V, NA=acceptorDopingPerCm3>0 cm^-3, Wb=baseWidthUm>0 um, εSi=11.7·ε0 F/cm, q=1.602e-19 C. Uses stable sqrt difference; checks total voltage finiteness and depletion-factor overflow. One-sided abrupt-junction approximation neglecting emitter side and non-uniform doping; valid for NA not too low and moderate VCB; result >=0, zero when VCB=0.
- BJT Early Voltage Calculator
Compute the BJT Early voltage as collector current divided by small-signal output conductance, VA = IC / go. IC is quiescent collector current in mA and go is dIC/dVCE in S.