Use this geological calculation for a transparent first-pass interpretation of measured rock, soil, fluid, well, stratigraphic, isotopic, geophysical, or seismic data under an explicitly selected model.

Flow rate

Circulating flow rate in cubic metres per second.

Mud density

Mud density in kilograms per cubic metre.

Nozzles

Number of open bit nozzles.

Nozzle diameter

Individual nozzle diameter in metres.

Discharge coefficient

Nozzle discharge (flow) coefficient.

Compute the jet impact force delivered by the bit nozzles from flow rate, mud density and nozzle geometry. The tool evaluates the supplied inputs together and returns the named outputs below; it does not infer omitted operating conditions or change the units shown.^[1]

Jet velocity

Effective jet velocity at the nozzles in metres per second.

Impact force

Jet impact force in newtons.

• Drilling and casing calculations depend on well geometry, fluid rheology and density, temperature, pressure, surge and swab, kick scenario, cement placement, wear, connection strength, transient hydraulics, and operator standards.
• Use finite inputs in the displayed units and preserve more precision than the final presentation requires. Independently verify safety-critical, financial, compliance, or production decisions.

Compare independent measurements and models, retain units and analytical metadata, propagate uncertainty, and validate interpretations against logs, cores, maps, laboratory data, or field observations.

• Drilling Hydraulics Bit Nozzle Velocity Calculator

  Compute bit nozzle velocity and total flow area from circulation rate, nozzle count and nozzle diameter.

• Drilling Hydraulics Pressure Loss Calculator

  Estimate laminar frictional pressure loss in drill pipe with the Bingham plastic pipe-flow equation.

• Choke Flow Rate Gilbert Calculator

  Estimate the multiphase liquid flow rate through a production choke with the Gilbert (1954) correlation given upstream wellhead pressure, gas-liquid ratio and choke bore.