Use this electronics calculation for a first-pass component, converter, signal, motor, or sensor estimate when the stated operating conditions and units match the device data.

Input step voltage (V)

Required number input.

Resistance (Ω)

Required number input.

Capacitance (F)

Required number input.

Step time (s)

Required number input.

Compute the practical RC differentiator step peak as -Vin x tau / (tau + t_step), where the theoretical ideal peak is unbounded for an instantaneous step. The tool evaluates the supplied inputs together and returns the named outputs below; it does not infer omitted operating conditions or change the units shown.^[1]

Differentiator peak (V)

The resulting differentiator peak returned as a number.

• Compact electronics formulas omit some combination of tolerances, temperature drift, bandwidth, loading, parasitics, noise spectrum, nonlinearity, clipping, calibration, layout, and device-specific limits. Typical datasheet values are not guaranteed limits.
• Use finite inputs in the displayed units and preserve more precision than the final presentation requires. Independently verify safety-critical, financial, compliance, or production decisions.

Check the result against the current datasheet and worst-case operating corners, then verify the circuit or measurement with simulation and bench testing where failure matters.

• ADC LSB Voltage

  Calculate one ideal ADC code width as full-scale input span divided by 2^N. Full-scale span is the high-to-low range, not necessarily the reference voltage for every ADC topology.

• Ideal DAC Output Voltage

  Calculate an ideal unipolar DAC code's voltage as Vref×code/2^N. The top code is one LSB below Vref; this does not include offset, gain, or integral nonlinearity.

• Capacitive PCB Crosstalk Voltage

  Estimate peak victim-node voltage from an aggressor voltage step using a capacitive divider: Vv=Va·Cc/(Cc+Cv). This lumped capacitive model excludes inductive coupling, termination, rise time, and transmission-line behavior.