Use this workshop calculation to turn measured dimensions and the selected construction convention into a cut, spacing, fit, or material-planning value.

Application

Application mode: one-sided (150 g/m²) or two-sided (100 g/m²).

Look up the recommended glue amount in grams per square metre for one-sided or two-sided application. The tool evaluates the supplied inputs together and returns the named outputs below; it does not infer omitted operating conditions or change the units shown.^[1]

Recommended glue (g/m²)

Recommended glue amount in grams per square metre.

• Nominal dimensions, kerf, moisture movement, hardware clearances, wall squareness, and manufacturer instructions can change the required shop dimension. Measure the actual assembly and test critical joints on scrap before cutting finished material.
• Use finite inputs in the displayed units and preserve more precision than the final presentation requires. Independently verify safety-critical, financial, compliance, or production decisions.

Complement the calculated dimension with a physical story stick, dry fit, or full-size layout. Follow the hardware, coating, adhesive, or machine manufacturer's limits where they differ from a rule of thumb.

• Glue Coverage Area

  Estimate glue-coated area from usable glue mass and product application rate in mass per unit area.

• Leimangabe G Pro Qm

  Applied adhesive spread rate in grams per square meter of coated surface, not the area of both faces unless both were coated.

• White Glue Durability Class

  Look up the usage description and boil water resistance of a white glue durability class.