Use this workshop calculation to turn measured dimensions and the selected construction convention into a cut, spacing, fit, or material-planning value.

Total price (EUR)

Total purchase price in euros.

Volume (m³)

Wood volume in cubic meters.

Compute the price per cubic meter of wood from total price and volume. The tool evaluates the supplied inputs together and returns the named outputs below; it does not infer omitted operating conditions or change the units shown.^[1]

Price per cbm (EUR/m³)

Price per cubic meter in euros.

• Nominal dimensions, kerf, moisture movement, hardware clearances, wall squareness, and manufacturer instructions can change the required shop dimension. Measure the actual assembly and test critical joints on scrap before cutting finished material.
• Use finite inputs in the displayed units and preserve more precision than the final presentation requires. Independently verify safety-critical, financial, compliance, or production decisions.

Complement the calculated dimension with a physical story stick, dry fit, or full-size layout. Follow the hardware, coating, adhesive, or machine manufacturer's limits where they differ from a rule of thumb.

• Planing Pass Depth Calculator

  Calculate the material removed per planing pass from the total depth and pass count.

• Press Pressure Spec Check

  Check whether wood-laminating pressure lies within a typical 0.2 to 0.8 newtons per square millimetre range.

• Leimangabe G Pro Qm

  Applied adhesive spread rate in grams per square meter of coated surface, not the area of both faces unless both were coated.