Use this workshop calculation to turn measured dimensions and the selected construction convention into a cut, spacing, fit, or material-planning value.

Profile system

Window profile system of the blend frame and sash.

Look up the frame depth and glazing rebate dimensions for Euroframe window profile systems. The tool evaluates the supplied inputs together and returns the named outputs below; it does not infer omitted operating conditions or change the units shown.^[1]

Frame depth (mm)

Frame construction depth in millimeters.

Glazing rebate depth (mm)

Glazing rebate depth in millimeters.

Glazing rebate width (mm)

Glazing rebate width in millimeters.

• Nominal dimensions, kerf, moisture movement, hardware clearances, wall squareness, and manufacturer instructions can change the required shop dimension. Measure the actual assembly and test critical joints on scrap before cutting finished material.
• Use finite inputs in the displayed units and preserve more precision than the final presentation requires. Independently verify safety-critical, financial, compliance, or production decisions.

Complement the calculated dimension with a physical story stick, dry fit, or full-size layout. Follow the hardware, coating, adhesive, or machine manufacturer's limits where they differ from a rule of thumb.

• Window Frame List Generator

  Compute the frame piece count, sash count, and glazing bead length for a window frame from its outer size.

• DIN 68901 Carcase Depth Lookup

  Look up the nominal DIN 68901 kitchen carcase depth for slim, standard, and deep classes; fronts are typically 50 mm deeper than the carcase.

• Biscuit Slot Depth Lookup

  Look up the standard joiner plunge depth for size 0, 10, and 20 compressed-wood biscuits.